PhD in Engineering, Tsinghua University, 1992
MSc in Engineering, Tsinghua University, 1989
BSc in Engineering, Tsinghua University, 1987

2000-Present Professor, Tsinghua University
1995-2000 Associate Professor, Tsinghua University
1996-1997 Research Associate, Hong Kong Polytechnic University
1992-1995 Lecturer, Tsinghua University

2000-Present Professor, Tsinghua University
1995-2000 Associate Professor, Tsinghua University
1996-1997 Research Associate, Hong Kong Polytechnic University
1992-1995 Lecturer, Tsinghua University
Professional memberships:
Chairman of ISO/TC306 (Foundry Machinery)
Chairman of Die Casting Committee of
Foundry Institution of Chinese Mechanical Engineering Society(FICMES)
Vice Chairman of FICMES
Vice Chairman of China Foundry Association (CFA)
Senior member of CMES(Chinese Mechanical Engineering Society)

Macro/Micro modeling and simulation of casting processes;
Development of high integrity die casting processes for aluminum and magnesium alloys;
Development of die cast aluminum and magnesium alloys;
Magnesium melt protection technology.

2010 Technical Achievement Award of Ford Research and Advanced Engineering
New Academic Researcher award of the year 2005 of Tsinghua University
Program for New Century Excellent Talents in University of China
Second Class Award for Science and Technology Progress from Beijing Municipality, 2002, the second contributor
First Class Award for Science and Technology Progress from State Education Ministry, 1999, the fifth contributor
Second Class Award for Science and Technology Progress from State Education Commission, 1996, the third contributor
Fundamental Research Award from Tsinghua University, 1996, the second contributor

Books:
1.XIONG Shoumei, JING Tao, XU Qingyan and KANG Jingwu. Casting CAD/CAE, Section No. 6, Volume No. 19, China Materials Engineering Canon, Chemical Idustry Press, 2006(in Chinese, Chief editor and author)
2.XIONG Shoumei, XU Qingyan and KANG Jingwu. Modeling and Simulation technology of casting processes, China Machine Press, 2004 (in Chinese, Chief editor author)
3.LIU Baicheng, et al., Numerical Simulation and Quality Control in Casting Engineering, China Machine Press, 2001(in Chinese, two chapters were written by XIONG Shou-Mei)
Representative Publications:
[1]Wang J, Guo Z, Xiong S M. Characterization of the morphology of primary silicon particles using synchrotron X-ray tomography. Materials Characterization, 123:354-359(2017)
[2]Yang, M.,Xiong, S. M.,Guo, Z., Effect of different solute additions on dendrite morphology and orientation selection in cast binary magnesium alloys, Acta Materialia, Vol.112, pp.261-272(2016)
[3]Bi, C., Xiong, S. M., Li, X. B., Guo, Z. P., Development of a Fluid-Particle Model in Simulating the Motion of External Solidified Crystals and the Evolution of Defect Bands in High-Pressure Die Casting, Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, Vol. 47, No. 2, pp. 939-947(2016)
[4]Li, X., Xiong, S. M., Guo, Z.,On the tensile failure induced by defect band in high pressure die casting of AM60B magnesium alloy,Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,Vol. 674, pp.687-695(2016) .
[5]Li, X., Xiong, S. M., Guo, Z.,Failure behavior of high pressure die casting AZ91D magnesium alloy, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,Vol. 672, pp.216-225(2016).
[6]Li, X., Xiong, S. M., Guo, Z., Improved mechanical properties in vacuum-assist high-pressure die casting of AZ91D alloy, Journal of Materials Processing Technology, Vol. 231, pp.1-7(2016)
[7]Li, X., Xiong, S. M.,Guo, Z.,On the porosity induced by externally solidified crystals in high-pressure die-cast of AM60B alloy and its effect on crack initiation and propagation, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 633, pp.35-41(2015)
[8]Yang, M.,Xiong, S. M.,Guo, Z., Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling, Acta Materialia, Vol.92, pp.8-17(2015)
[9]Guo, Z.;Mi, J.;Xiong, S.;Grant, P. S., Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach, Journal of Computational Physics, Vol. 257,pp.278-297,JAN 15 2014
[10]G.J.Cha, J.G. Li, S.M. Xiong, Z.Q. Han, ZQ, Fracture behaviors of A390 aluminum cylinder liner alloys under static loading, Journal of Alloys and Compounds, 550, 370-379(2013)
[11]X.F. Wang, S.M. Xiong, Oxidation behavior of molten magnesium in atmospheres containing SO2 and air in a sealed furnace, Corrosion Science, 66, 300-307(2013)
[12]Xian-Fei Wang, Shou-Mei Xiong, Characterization of the Surface Film Formed on Molten AZ91D Magnesium Alloy in Atmospheres Containing SO2, Metallurgical and Materials Transactions A, Volume 43, Issue 11, pp 4406-4413(2012).
[13]Wang, Xian-Fei,Xiong, Shou-Mei, Characterization of surface films formed on molten magnesium in atmospheres containing SO2, Materials Chemistry and Physics, v 135, n 2-3, p 541-548(2012)
[14]Xian-Fei Wang, Shou-Mei Xiong, Oxidation behavior of molten magnesium in atmospheres containing SO2, Corrosion Science, 53(12), 4050-4057(2011).
[15]Song, Jie;Xiong, Shou-Mei.The correlation between as-cast and aged microstructures of high-vacuum die-cast Mg-9Al-1Zn magnesium alloy, Journal of Alloys and Compounds, Vol. 509, No. 5, p 1866-1869(2011)